Owner guide · Peoria Toyota · Peoria, IL
Toyota Camry Headlight Bulb Guide
What the Camry uses for headlights, which bulbs you can replace yourself, their bulb numbers and wattage, and how to change them, from Toyota's 2027 Camry owner's manual, read November 16, 2026.

What headlight bulb does a Toyota Camry use?
None you can buy and swap yourself. Toyota's 2027 Camry owner's manual lists the headlights and daytime running lights among the lights that need to be replaced by your Toyota dealer, and says the lights other than three bulb-type lights consist of a number of LEDs. The bulbs you can replace are the front turn signal/parking lights (7444NA), rear turn signal lights (WY21W) and back-up lights (W16W), on vehicles that have the bulb type.
Camry light bulb numbers and wattage
| Light | Bulb No. | Watts | Type |
|---|---|---|---|
| Front turn signal/parking lights (bulb type) | 7444NA | 28/8 | Wedge base bulb (amber) |
| Rear turn signal lights (bulb type) | WY21W | 21 | Wedge base bulb (amber) |
| Back-up light (bulb type) | W16W | 16 | Wedge base bulb (clear) |
| Trunk light (interior) | W5W | 5 | Wedge base bulb (clear) |
| Rear interior light (if equipped) | Not listed | 8 | Double end bulb |
From the Light bulbs table in Toyota's 2027 Camry Owner's Manual (OM06325U), page 490, read November 16, 2026. Headlights are not in the table. The front turn signal/parking, rear turn signal and back-up lights come as either a bulb type or an LED type; the bulb numbers apply to the bulb type only. The manual's do-it-yourself steps cover the three exterior bulbs, not the interior ones.
Lights your Toyota dealer replaces
The manual lists these Camry lights as ones that need to be replaced by your Toyota dealer:
- Headlights
- Daytime running lights
- Parking lights (LED type)
- Front turn signal lights (LED type)
- Front side marker lights
- Accent lights (if equipped)
- Side turn signal lights
- Tail lights
- Stop lights
- Back-up lights (LED type)
- Rear turn signal lights (LED type)
- Rear side marker lights
- High mounted stoplight
- License plate lights
It explains that every light other than the front turn signal/parking lights (bulb type), back-up lights (bulb type) and rear turn signal lights (bulb type) consists of a number of LEDs. If any of the LEDs burn out, the manual says to take the vehicle to your Toyota dealer to have the light replaced.
Replacing a Camry front turn signal/parking bulb
For the front turn signal/parking lights (bulb type), the manual's steps are:
- Turn the bulb base counterclockwise and remove it.
- Remove the light bulb.
- Install a new light bulb, then install the bulb base to the light unit by inserting it and turning it clockwise.
After installing the bulb base, the manual says to wiggle it lightly to make sure it is securely installed, then turn on the lights and turn signal lights to check visually that no light leaks from between the bulb base and the light unit.
Replacing a Camry rear turn signal bulb
For the rear turn signal lights (bulb type), the manual's steps are:
- Open the trunk lid.
- Insert a flathead screwdriver between the cover and the light assembly and pry up the cover to disengage the claws. Wrap the tip of the screwdriver with a cloth to prevent scratching.
- Pull the cover toward the rear of the vehicle and remove it.
- Remove the 2 screws, then remove the light assembly by pulling it straight back.
- Turn the bulb base counterclockwise.
- Remove the light bulb.
- Install the new bulb by doing the bulb base and bulb steps in reverse.
- Install the light assembly, aligning its guide and pin with the mounting, then install the 2 screws.
- Install the cover.
Replacing a Camry back-up light bulb
For the back-up lights (bulb type), the manual's steps are:
- Open the trunk lid, remove the clips, and pull back the cover. To remove a clip, pry the center portion out with a flathead screwdriver, then remove the whole clip.
- Disconnect the connector while depressing the lock release.
- Turn the bulb base counterclockwise and remove it.
- Remove the light bulb.
- Install a new light bulb, install the bulb base to the light unit, turn the bulb base clockwise, and connect the connector.
- Reinstall the trunk lid cover with the clips.
Again, the manual says to wiggle the bulb base lightly to make sure it is secure, then turn on the back-up lights and check that no light leaks from between the bulb base and the light unit.
Before you change a Camry bulb
The manual says to check the wattage of the bulb before replacing it, and Toyota recommends genuine Toyota products designed for the vehicle: because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable. If a replacement seems difficult, it says to contact your Toyota dealer. Its warnings include:
- Turn the power switch off before any bulb replacement, to avoid burns from hot components or getting caught in an operating component.
- Turn off the lights and do not replace a bulb right after turning them off. The bulbs become very hot.
- Do not touch the glass portion of the bulb with bare hands. If you must hold it, use a clean dry cloth. A scratched or dropped bulb may blow out or crack.
- Fully install bulbs and any parts used to secure them, and make sure bulbs are fully seated and locked, to prevent heat damage, fire or water entering the light unit.
- Do not attempt to repair or disassemble the light bulbs, connectors, electric circuits or component parts, because of the risk of electric shock.
If a light does not come on after a fuse is replaced, the manual says a bulb may need replacement.
How the Camry headlights work
The headlight switch has an AUTO position: the headlights, daytime running lights and the other exterior lights turn on and off automatically using a headlight control sensor. The manual says the sensor may not work properly if something is placed on it or affixed to the windshield over it. In daytime driving with the switch in AUTO, the headlights also turn on automatically several seconds after the windshield wipers are used.
Daytime running lights make the car more visible to other drivers in daytime and turn on automatically when the hybrid system is operating, the parking brake is released and the headlight switch is in a qualifying position. In the U.S., they can be turned off with the switch. The manual says they are not designed for use at night.
With the headlights on, push the lever away from you for high beams, or pull it toward you and release it to flash them. Once enabled, the Automatic High Beam (AHB) system uses a front camera on the upper windshield to switch the headlights between high and low beams; the manual warns not to rely on it too much. If the lights are left on when the power switch is turned off, a 12-volt battery-saving function turns them off after about 20 minutes.
Temporary condensation on the inside of a lens is not a malfunction, according to the manual. Contact your Toyota dealer if large drops of water build up inside a lens or water builds up inside a light.
Peoria Toyota hours
| Department | Hours |
|---|---|
| Sales | Mon-Fri 9 a.m.-7 p.m.; Sat 9 a.m.-5 p.m.; Sun closed |
| Service | Mon-Fri 7 a.m.-5:30 p.m.; Sat 7 a.m.-12 p.m.; Sun closed |
From Peoria Toyota's website, November 16, 2026. Holiday hours can differ.
Toyota Camry headlight and bulb FAQ
What headlight bulb does a Toyota Camry use?
Toyota's 2027 Camry owner's manual does not list a replaceable headlight bulb. It puts the headlights and daytime running lights on its list of lights that need to be replaced by your Toyota dealer, and it says that every exterior light other than three bulb-type lights is made up of a number of LEDs.
Can I replace a Camry headlight myself?
The manual's do-it-yourself section covers only three bulbs: the front turn signal/parking lights (bulb type), the rear turn signal lights (bulb type) and the back-up lights (bulb type). For the headlights and every other light, it says to contact your Toyota dealer.
What happens if a Camry LED light burns out?
The manual says the LED lights consist of a number of LEDs, and if any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
What bulbs can I replace on a Camry?
On vehicles with bulb-type lights, the manual lists bulb No. 7444NA (28/8 W, amber wedge base) for the front turn signal/parking lights, WY21W (21 W, amber wedge base) for the rear turn signal lights and W16W (16 W, clear wedge base) for the back-up light.
Is water inside a Camry headlight a problem?
The manual says temporary condensation on the inside of a lens does not indicate a malfunction. It says to contact your Toyota dealer if large drops of water have built up inside a lens or water has built up inside a light.
Why do my Camry headlights turn on by themselves?
With the headlight switch in AUTO, the manual says the headlights turn on and off automatically using a headlight control sensor. In daytime driving with the switch in AUTO, the headlights also turn on several seconds after you use the windshield wipers.
Can Peoria Toyota replace a Camry headlight?
Yes. Our service team at 7401 N Allen Rd in Peoria can inspect and replace Camry headlights and other exterior lights. See the service hours above or schedule online.
Camry light out?
Bring it to Peoria Toyota, 7401 N Allen Rd in Peoria. Our service team can inspect the light and replace an LED unit or bulb with genuine Toyota parts.
Sources
Bulb numbers, wattage, the list of dealer-replaced lights, replacement steps, warnings and headlight operation are from Toyota's 2027 Camry Hybrid Owner's Manual (OM06325U), read November 16, 2026. Your own owner's manual is the final word for your vehicle. Address and hours are from Peoria Toyota's own website. Photo is illustrative.
- 2027 Camry Hybrid Owner's Manual (OM06325U): headlight switch, daytime running lights and high beams (pp. 192-195), fuses and light bulbs (pp. 415-420), light bulb specifications (p. 490), Toyota, read November 16, 2026
- Address and sales and service hours, Peoria Toyota, November 16, 2026
